.308 DPMS Compatible Lower Receiver

.308 DPMS Compatible Billet Lower Receiver
Dimensional correct.
Models are tested and proven, ready for CNC.
Models also available for sale in STEP/IGS file format as well as original SolidWorks Source Files.


  • Pete Schoppenhauer

    Where can I download the STEP or IGES file?

    • http://www.youtube.com/SSIDesigner Nathan F.

      @peteschoppenhauer:disqus , We can give all that information via e-mail if you want. Or if you preffer you can contact us at contact@ssidefense.com

      • Pete Schoppenhauer

        Via email is fine.
        Thank you,
        Pete

        Pete Schoppenhauer

        Engineering Manager

        New Product Development

        AGC
        106 Evansville Avenue

        Meriden, CT 06451

        P – 203-317-2620

        F – 203-235-6543

        C – 203-206-9538

        petes@agcincorporated.com

        http://www.agcincorporated.com

        AGC – Precision Components that Travel the World Q

        Warning! Information herein may be subject to export control laws. The information contained within this email may be subject to the International Traffic in Arms Regulation (ITAR) or the Export Administration Regulations (EAR). AGC contends that this information shall not be exported, released, or disclosed to foreign nationals inside or outside the United States without first complying with the export authorization requirements of the ITAR and/or the EAR.
        THIS MESSAGE IS INTENDED ONLY FOR THE USE OF THE INDIVIDUAL OR ENTITY TO WHICH IT IS ADDRESSED AND MAY CONTAIN INFORMATION THAT IS PRIVILEGED, CONFIDENTIAL, PROPRIETARY TO AGC AND EXEMPT FROM DISCLOSURE UNDER APPLICABLE LAW. If the reader of this message is not the intended recipient, or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, forwarding, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by e-mail or telephone, and delete the original message immediately.
        Please consider the environment before printing this e-mail.

  • Bob

    Looking for the STEP/IGS and original SOLIDWORKS FILES, email would work out excellent. Thanks in advance,
    Bob

    • http://www.youtube.com/SSIDesigner Nathan F.

      @disqus_506ej2f6Vu:disqus email sent!

      • madmax1234

        Hello Nathan

        Please be so kind and send me a PN!

        I want the SWX-files please.

        • http://www.youtube.com/SSIDesigner Nathan F.

          William e-mail sent

          • Chris

            Nathan… one more? 🙂

  • madmax1234

    Hello Nathan

    Please be so kind and send me a PN!

    I want the SWX-files please

  • Matthew Marsolek

    Also looking for solidworks file preferably, or step/iges. Thanks in advance!

    • http://www.youtube.com/SSIDesigner Nathan F.

      E-mail sent

  • Nick

    Can I please have a STEP/IGS or Solidworks file emailed to me? I am using Solidworks 2015. Thank you!

    • http://www.youtube.com/SSIDesigner Nathan F.

      Nick: e-mail sent.

  • Kevin

    Can I please have a STEP/IGS file emailed to me? thank you

    • http://www.youtube.com/SSIDesigner Nathan F.

      Kevin: e-mail sent.

  • PCER1

    Can you please email me a solidworks model of this? Thank you

    • http://www.youtube.com/SSIDesigner Nathan F.

      Paul: e-mail sent.

  • Jesse

    Is there any way that I can get a SolidWorks model of this and the matching upper receiver? Thanks a lot!

    • http://www.youtube.com/SSIDesigner Nathan F.

      Jesse: e-mail sent.

  • lt

    Nathan – Thanks for putting this together. Can I please get the SolidWorks part file(up to SW2014) emailed to me?

    • http://www.youtube.com/SSIDesigner Nathan F.

      e-mail sent.

  • Wayne Beede

    Nathan how do I go about getting a set of your source files for the 308 Upper, Lower Bolt and bolt carrier in Step/IGS and Solidworks.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Wayne: e-mail sent

  • Eman

    May I get the STEP/IGS and solidworks files for the .308? Thanks Eman

  • Robert Fontaine

    May i get a Solidworks of the .308 lower thanks Robert

    • http://www.youtube.com/SSIDesigner Nathan F.

      Robert: e-mail sent.

  • Scott Hardiman

    Hi

    Can you,please send me complete Step/igs and soldworks files for the the complete build of the .308. Is there anything else I will require?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Scott: e-mail sent.

  • Jayson Wilson

    May i get a Solidworks of the .308 lower thanks

  • Mark

    HI Nathan
    Would you mind sending me the STEP/IGS file format and the SolidWorks Source File. Thank you and your team in advance for all of your hard work!

  • Lynn Roche

    Nathan, could I please have a STEP/IGS file emailed to me? thank you

    • http://www.youtube.com/SSIDesigner Nathan F.

      Lynn: e-mail sent.

  • gregorio

    Nathan, could you please send the step/IGES files to me.
    Thank you very much!!
    Great watching you create the AR15 CAD model

  • Eric Schacht

    Nathan, Can you e-mail me the solidworks model? Thanks, Eric

    • http://www.youtube.com/SSIDesigner Nathan F.

      Eric: e-mail sent

  • aashcraft4

    Hi Nathan, could I please get the Step/IGS and source files emailed to me (AR15 and 308)? The designs look great! Thanks!

    • http://www.youtube.com/SSIDesigner Nathan F.

      Alan: e-mail sent.

  • jason

    hi nathan great work. wondering if i also get the step/IGS and source files emailed to me? the ar15 and of course the .308

  • a carmichael

    Hello Nathan, may I please get the Solidworks files for the AR15 and .308 lowers emailed to me? I love your modeling video. Thank you so much!

  • Axel

    Hello,

    I am also interested in these CAD-files. Specifically all of the .308 AR stuff. Would very much appreciate an e-mail! Cheers

    • http://www.youtube.com/SSIDesigner Nathan F.

      Axel: e-mail sent.

  • Jeff Lamb

    I’d love to have the model in Catia if possible. Thank you. Beautiful receiver design.

  • delion

    Looking for the STEP/IGS and original SOLIDWORKS FILES, email would work out excellent. Thanks in advance,

  • Curt Winter

    Looking for the sldpart files as well… Thanks in advance!

  • Jakop Larsson

    Hi

    I am also interested in these CAD-files.

    Regards

  • Winter Family

    I would like the model but downloads as .eprt Am I doing something wrong?

  • Jon Smith

    Nice ! Can you email a set of the STEP/IGS files for upper and lower for this too. Thanks !

  • W Walterson

    Beautiful models. Would it be possible to to get the 308 and AR15 lowers in soldworks format? Thanks a ton!

    • http://www.youtube.com/SSIDesigner Nathan F.

      W Walterson: e-mail sent.

      • wizzrd

        Nathan, Could you please send the solidworks files to me as well? Thanks

        • http://www.youtube.com/SSIDesigner Nathan F.

          Matt: e-mail sent.

  • wizzrd

    I’d also like the Solidworks file. Thanks

  • Daryl Bandy

    Can I please get all of the 308 SolidWorks part files(up to SW2014) emailed to me? Thanks for all your work.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Daryl: e-mail sent

      • Ludwig Moser

        Nathan, Could you please send the solidworks files to me as well? Thanks

    • http://www.youtube.com/SSIDesigner Nathan F.

      Daryl: e-mail sent

  • James Briggs

    I would also like the solid works files as well as the step/igs for the .308 and ar15 Thank you so much.

    • http://www.youtube.com/SSIDesigner Nathan F.

      James: e-mail sent.

  • Matt

    Any way I could get a copy of the solid works file for this .308 lower? Thanks in advance

    • http://www.youtube.com/SSIDesigner Nathan F.

      Matt:
      e-mail sent.

  • Mike

    any way I could get a copy of the solid works file for this .308 lower? Thanks

    • http://www.youtube.com/SSIDesigner Nathan F.

      Mike: e-mail sent.

  • Omar Awad

    Hi can I have the solidworks part for this, the upper and bolt carrier emaied to me at awadomarlra@yahoo.com, thank you!

  • Duane Chapman

    Can I get the step/igs file please thanks nowherehomestead@gmail.com

    • http://www.youtube.com/SSIDesigner Nathan F.

      Duane: e-mail sent.

  • John

    Can you please send me the solidworks file? ilikefreestuff2469@yahoo.com Thanks

  • Captainkirk

    can you please send the native solid works files or iges files for all of the ar10 models?

  • Tex_Born

    Can i please get a STEP file sent to me? mj_gross@comcast.net

  • patrick92z28

    Could you send me the iges file for the lower? Awesome site by the way!
    Thank you

  • Randall Kempf

    Please send step/igs 308 files to naa73x @ gmail.com, Many Thanks!

  • SW

    Please send step/igs file of 308 DPMS lower to swrencher@gmail.com. Thank you very much!

  • al cortez

    can u make a youtube video of this please i wanna learn how to model this in solid works

  • steven

    could I get a step file please? Thanks in advance! trithis08@gmail.com

  • Ballistic45

    Hello I am looking for the 308 DPMS IGS, and or STEP file to download and play around with. How can I get the file? Awesome work love the lines of the Lower.

  • Ballistic45

    I guess from the other postings, I need to leave my email address for the IGS or STEP files for the DPMS LR 308 Lower. jlongley34@yahoo.com

    Thanks,

  • Ballistic45

    Going to try to see if I can use Fushion360 to open the files.

  • Julie Beckworth

    Hi, looking for igs or step files for this. Thanks. ibreakforpotatoes@gmail.com

    • http://www.youtube.com/SSIDesigner Nathan F.

      Julie: e-mail sent.

  • NICK

    Can i get a iges, step or parasolid file by chance ? nickbauer48@gmail.com

    • http://www.youtube.com/SSIDesigner Nathan F.

      Nick: e-mail sent.

  • patrick92z28

    Can I also get a iges, step or parasolid file by chance please? patrick92z28@yahoo.com

  • Richard Rudelavage

    can you please send me a step/igs file of this solid model?rrudelavage@gmail.com
    thank you

    • http://www.youtube.com/SSIDesigner Nathan F.

      Richard: e-mail sent.

  • Weston Hartley

    New to the site, and need this file. It wont let me sign in to download. Any help would be appreciated.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Guys: disqus.com made some changes to their api, now the login is working

  • Michael Stock

    Would you please send the solidworks source file?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Michael: e-mail sent.

  • RPE Motorsports

    Can you Please email me the SLDPRT file to rpemotorsports@gmail.com. Thanks in Advance!

  • Daniel M Crnkovich

    could i please get a copy of the IGES file. Many Thx dan.crnkovich@gmail.com

    • http://www.youtube.com/SSIDesigner Nathan F.

      Daniel: e-mail sent.

  • KAI FREDLOV

    Can I get this model as a STEP/IGS please?

  • Will Morris

    Hello, could you email me the Solidworks source file please?

  • Michael A Keown

    Can I get a step/IGES file please. mak41985@yahoo.com

    • http://www.youtube.com/SSIDesigner Nathan F.

      Michael: e-mail sent.

  • ArMak15

    Hello can you send me the Solidworks file please?

  • Anthony Cuomo

    Hello, Would you be able to send me the SolidWorks File?
    Thank you

    vitaldezigns@gmail.com

    • http://www.youtube.com/SSIDesigner Nathan F.

      Anthony: e-mail sent.

  • bob r

    Can I get this model as a STEP/IGS please? thanks

    • http://www.youtube.com/SSIDesigner Nathan F.

      Bob: e-mail sent.

  • Claus

    can I get this sent to me as a STEP file.
    Thanks

    • http://www.youtube.com/SSIDesigner Nathan F.

      Claus: e-mail sent.

  • cody wagman

    Can you send me the solidworks model? thank you
    c.a.wgman77@gmail.com

    • http://www.youtube.com/SSIDesigner Nathan F.

      Cody: e-mail sent.

  • steve

    can I get this sent as a step file please , stevemarich@gmail.com

    • http://www.youtube.com/SSIDesigner Nathan F.

      Steve: e-mail sent.

  • eric

    Hi Nathan,
    an I get this file in DFX/ STEP/ IGS? I t would be greatly appreciated
    please send to ezamaron@att.net
    thank eric

  • Mike

    Nathan,
    Could you please send me the IGES file for this receiver to mpk4580@hotmail.com
    Thank you

    • http://www.youtube.com/SSIDesigner Nathan F.

      Mike: e-mail sent.

  • Dan

    Could you please send me the Solidworks File. Thank you.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Dan: e-mail sent.

  • Adam P

    Can I get the solidworks and step drawing for this receiver please?
    apessetto@hotmail.com

    Thanks,

    • http://www.youtube.com/SSIDesigner Nathan F.

      Adam: e-mail sent.

  • Nemopastor –

    Hi, could you please send me the Step files for the upper and lower?
    Thank you

    • http://www.youtube.com/SSIDesigner Nathan F.

      Gerrit: e-mail sent.

  • Yatt

    Howdy would yall be able to send the source solidworks files for AR10 upper and lower receiver?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Yatt: e-mail sent.

  • DDDex

    Is it possible to get the solidworks source files or specifically to you have the fusion 360 files available?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Dave: e-mail sent.

  • Aaron Cox

    Hi, could you please send me the Step files for the .308 DMPS Compatible upper and lower?
    Thank you

    • http://www.youtube.com/SSIDesigner Nathan F.

      Aaron: e-mail sent.

  • Roger C

    Hello, would it be possible for you to send me the STEP or IGES files for the 0.308 dpms lower receiver ? either is fine. Thanks.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Roger: e-mail sent.

  • Zach Francisco

    Can I get the STEP and IGES files for the .308 DPMS Compatible Lower Receiver please? Thanks Nathan!

    Zach

    • http://www.youtube.com/SSIDesigner Nathan F.

      Zach: e-mail sent.

  • Sergey Pestin

    Nataniel,
    Please can you forward me the STEP/IGS and solidworks source files for the DPMS AR10 lower and upper receiver.

  • Andrew Vik

    can i get step files?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Andrew: email sent.

  • Schmepe

    Could I please have the .stp/.igs or solid works files? Thanks.

  • Chad

    Nathan, can you please email me the .stp or .igs file of the .308 DPMS lower receiver? Thank you.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Chad: e-mail sent.

  • Kendall Andersonq

    Can I get the solidworks file please
    Thanks

  • Matt

    May I please request the SLDPRT .308 DPMS Compatible Billet Lower file? Thanks!

    • http://www.youtube.com/SSIDesigner Nathan F.

      Matt: e-mail sent.

      • Kendall Andersonq

        Nate could you send me that file also please

        • http://www.id6653184.sexyztnv.website disqus_77l86HW9EN

          kendallandersonq wrote

  • Kendall Andersonq

    May I please get the sldprt .308 dpms lower file. Thanks

    • http://www.youtube.com/SSIDesigner Nathan F.

      Kendall: e-mail sent.

  • ctullis

    Can I get a copy of the solid works file for the 308 lower? thanks!

  • Saufkopp

    Hello Master, can i get the .step/.igs file please? thank you very much.

  • Patrick Murphin

    Would it be possible to get this in an .igs or .step format. Thanks

    • http://www.youtube.com/SSIDesigner Nathan F.

      Patrick: e-mail sent.

      • Patrick Murphin

        Nathan I never got an e-mail. Could you try it again. Thanks again.

        • http://www.youtube.com/SSIDesigner Nathan F.

          Patrick: I have resent the e-mail

  • Wade

    Can I get the IGS or STEP file please.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Wade: e-mail sent.

  • Scott Cutright

    Are the STEP and SW Source Files still available?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Scott: Yes they still are.

  • Ankush K

    Hey, could you please send me IGES file?

  • LUKE

    How do I go about getting the IGES files?

  • Scott Snyder

    would it be possible to get the Solidworks source file for this?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Scott: email sent.

  • Reynaldo Carson

    Would it be possible to get this file in STL?

  • monty

    Would it be possible to get the IGS format? Or solidworks souce files?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Monty: e-mail sent.

      • monty

        Nathan, I did not receive the email. I checked my spam folder also. Could you please re-send the file?

  • Justin Wegner

    Can I get this in Solidworks flormat? .sldprt

  • Jason

    Would it be possible to get this in a .stp file?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Jason: e-mail sent.

  • Tecks

    Could I please get the STEP file?

    Thanks in advance,
    Tecks

    • http://www.youtube.com/SSIDesigner Nathan F.

      Teck: e-mail sent.

      • john byd

        Nathan can I please have the .step file for .308 DPMS Compatible Billet Lower Receiver

        thanks!!

        • http://www.youtube.com/SSIDesigner Nathan F.

          John: e-mail sent.

  • Chad Kassem

    May I please get the SW file… or STEP? Thank you sir!

    • http://www.youtube.com/SSIDesigner Nathan F.

      Chad: e-mail sent.

  • Ryan Z

    I would also like to have the STEP file for this please. Thank you!

  • Average Joe

    Nathan,
    Would it be possible to get a solid model file of the DPMS AR10 lower Rec.?

  • ctullis

    Would it be possible to get a copy of the solid model? having a problem and would like to check against a known model. thanks!

  • Colby

    Is it still possible to get the the step file?

  • Professor Giggle

    would be awesome to get these in stl or igs or f3d

    • http://www.youtube.com/SSIDesigner Nathan F.

      Professor Giggle: e-mail sent.

      • TILTED

        Hi Nathan, any way I could get the .308 lower model in a step or similarly universal format? Either way, thanks for your time and all that you do.

  • Nicholas Haynes

    Can I get a copy of the original Solidworks source files. Thank you

    • http://www.youtube.com/SSIDesigner Nathan F.

      Nicholas: e-mail sent.

  • Michael A Keown

    Can I get this in a STL or IGES file please?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Michael: e-mail sent.

      • sv

        Small Frame .308 (DPMS GEN II COMPATIBLE) Receiver Set, Please

        • http://www.youtube.com/SSIDesigner Nathan F.

          Sv: e-mail sent.

  • martin

    hey, could I please get the step file for the lower ?

  • Matt

    Could I get this in a solidworks source file please?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Matt: e-mail sent.

  • Steve Northrup

    I too would like the solidworks source file. Do you also have this with the m4 trigger pocket?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Steve: e-mail sent.

  • Vinnie P

    New to this. Looking for the Solidworks Source file as well. Thank you

    • http://www.youtube.com/SSIDesigner Nathan F.

      Vinnie: e-mail sent.

  • Jeremy Logan

    I’d like to get the SolidWorks file as well please.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Jeremy: e-mail sent.

  • Hawkeye257

    Hey Nathan. Would I be able to get the Solidworks and STL file as well? Thanks in advance

  • Trent pope

    I’d like these models as well please.

  • Ken

    Is this for the DPMS 308 Gen 1 or Gen 2?

    • http://www.youtube.com/SSIDesigner Nathan F.

      This is for the DPMS 308 Gen 1. The Gen2 is located here http://www.ssidefense.com/small-frame-308-dpms-gen-ii-compatible-lower-receiver/

      • Ken

        It actually isn’t. If you click on the link it says it can’t be found. Does anybody have it?

        • http://www.youtube.com/SSIDesigner Nathan F.

          Ken: The Gen2 models are not Longer Available for public.

          • Ken

            I am sure somebody has a copy somewhere though.

  • Everton Porsch

    How i made to buy the .IGS file?
    Please answear to porsch762@gmail.com

  • Theo Iversen

    How much for the igs file?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Theo: e-mail sent.

  • Charlie Johnson

    Can you send me the file please?

  • Matt Spencer

    Can I get the Solidworks file please?
    Thanks

  • Omar Melendez

    Can you send me the file please

  • JUSTIN

    can you send me the file please and thank you

  • timothy litchfield

    can you send me the step file

    • http://www.youtube.com/SSIDesigner Nathan F.

      Timothy: e-mail sent.

    • Jorge Alberto Rodriguez Moran

      Can you send me the solidworks files too? Please

  • Sanguinious

    Would it be possible to get the solid works file(s) for the GEN 1 receiver set?

  • max goddard

    Could you send me the step file?

  • Mike

    May I pretty please get this in step?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Mike: e-mail sent.

  • Matthew Haggerty

    Can you send me the solidworks file please?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Matthew: e-mail sent.

  • AJ Gracy

    Could I get this in a STEP file when you have some time? Thanks!!

    • http://www.youtube.com/SSIDesigner Nathan F.

      AJ: e-mail sent.

  • Kevin Hale

    Just wondering how I can go about getting a step file?

  • Tremont

    Could I get a STEP file for the model? Thanks!

  • Saber CNC

    Could I please get the .STEP or .SLDPRT file for this version?

  • Brandon Garner

    I need the solid model for solidworks. step, iges, etc.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Brandon: e-mail sent.

      • Tremont

        Any chance I can get it as well? Every solid model I’ve found is for an AR10 or AR15, but nothing for a proper 308

        • http://www.youtube.com/SSIDesigner Nathan F.

          Tremont: e-mail sent.

  • Zach Carlson

    Can I get the solid works model, step/IGS

    • http://www.youtube.com/SSIDesigner Nathan F.

      Zach: e-mail sent

  • John Chambers

    Is it still possible to get the .308 receiver set STEP/IGS files? Thanks for all you do!!!!

    • http://www.youtube.com/SSIDesigner Nathan F.

      John: e-mail sent.

      • Nate

        I see you are sending them out in individual emails. Is there by chance a zip that contains all the different model files (upper, lower, assy, BCG, etc) in STEP and/or SLDPRT? Thank you

  • Vincent

    Nathan F. Can I get the hook up on that STP FILE??? Thanks in advance!

    • http://www.youtube.com/SSIDesigner Nathan F.

      Vincent: e-mail sent.

  • HTV

    Could you send me the STP File please?

  • bf.cnc23@

    Does anyone have the STP file? If so can you email it to me.

    • http://www.youtube.com/SSIDesigner Nathan F.

      e-mail sent.

  • Alt Alt

    Hi, could you email me the STP file?

  • Jason

    Could I get the solidworks files for the 308 upper, lower, BC, and bolt?

    Thanks

    • http://www.youtube.com/SSIDesigner Nathan F.

      Jason: e-mail sent.

  • bob ross

    Can I get the the a file for fusion 360 for the lower and upper?

  • Tyler Sterrett

    Is it still possible to get a step file for the .308 lower. Thank you.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Tyler: e-mail sent.

  • Justin Harvey

    Hey, I’d love to get the step file too plz

  • disqus_Sl3jN3l1JD

    I’m having trouble viewing the Model file – I am using the eDrawings App on a mac. Any ideas?

  • Jared Giannini

    Would like to get pricing for the AR10 upper and lower. Thank you.

  • Garrett Amner

    would like to get a step file for the .308 lower please.

    thank you

  • Kyle Dibble

    Could I get this 308 lower in a stp or igs file please and thank you

  • Joseph Bernavich

    Can I have the step file instead of the eprt, please?

  • Matt Chapin

    Would it be possible to get a step or parasolid file for the .308 lower please?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Matt: e-mail sent.

  • disqus_82ZdFKwpFD

    could I also get the step file?

  • Mark Rich

    Email me for the solid file please

    • http://www.youtube.com/SSIDesigner Nathan F.

      Mark: replied via e-mail

  • Noah Patriquin

    can I have the step file via email please?

  • Jeff Lee

    Can I also get solid file?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Jeff:
      e-mail sent.

  • John Doe

    Could I get the solidworks/cad file? Thank you for sharing!

    • http://www.youtube.com/SSIDesigner Nathan F.

      Sir: e-mail sent

  • Omar Melendez

    Could I get the solidworks/cad file? Thank you for sharing!

    • http://www.youtube.com/SSIDesigner Nathan F.

      Omar: e-mail sent.

  • John Doe

    May I please have the STEP/solid cad file for this wonderful lower? Thanks!

  • Sean Cline

    May I have the solidworks file for this model? Thank you.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Sean: e-mail sent.

  • Nathan Tomlinson

    Could I have the Step file please.

  • Aaron Wagner

    May I get the file for this?